Walton Primo E3 Flash File V 4.2.2 Without Password
Walton Primo E3 Flash File V 4.2.2
Flashing Process :
Step 1: Download the firmware to your computer.
Step 2: Extract the file in desire drive to your computer.
Step 3: Download correct USB Driver.
Step 4: Extract the file to your computer.
Step 5: Install USB Driver.
Step 6: Download SP Flash Tool.
Step 7: Run sp flash tool.
Step 8: Load scatter file from the extracted firmware folder
Step 9: Connect your Device using USB Cable.
Step 10: Now Click the Download / upgrade firmntb of SP flash tool to start flashing.
Step 11: And wait for finish the process and please don’t unplug your device before finish the process.
Step 12: If the flash success a green ring will show on the top of the display.
Step 1: Download the firmware to your computer.
Step 2: Extract the file in desire drive to your computer.
Step 3: Download correct USB Driver.
Step 4: Extract the file to your computer.
Step 5: Install USB Driver.
Step 6: Download SP Flash Tool.
Step 7: Run sp flash tool.
Step 8: Load scatter file from the extracted firmware folder
Step 9: Connect your Device using USB Cable.
Step 10: Now Click the Download / upgrade firmntb of SP flash tool to start flashing.
Step 11: And wait for finish the process and please don’t unplug your device before finish the process.
Step 12: If the flash success a green ring will show on the top of the display.
File Full Free
maddar chaler bacha
ReplyDelete\