Samsung Galaxy Core Prime G360H Firmware / Flash File

Samsung Galaxy Core Prime G360H Firmware / Flash File

100% TESTED NO DEAD RISK

How To Flash Samsung Galaxy Core Prime G360H V4.4.4

Firmware

Step 1: Download Firmware file from the download section above

Step 2: Download Odin and extract the contents in the zip archive and save the files on your PC then switch off your device. Then run ODIN.

Step 3: Boot it in Download Mode by pressing and holding Volume Down + Home + Power Button simultaneously.

Step 4: You’ll see a warning screen, press Volume Up to continue.

Step 5: Connect the phone to computer via USB cable and wait for the device to be added by Odin, if no device is detected you need to reinstall the Samsung USB drivers. If your device is detected, you’ll see “Added” message in the message box.

Step 6: On ODIN windows, click on the PDA or AP button, then locate the firmware file that you downloaded and load it in ODIN and click Start Button.

Step 7: Once the installation is complete, you will see the PASS alert and your device will reboot automatically.

DOWNLOAD odin3_v3.12.7

DOWNLOAD

DOWNLOAD Samsung-Usb-Driver-v1.5.60.0