Samsung Galaxy J2 SM-J200h V5.1.1 Firmware /Flash File Without Password 100% Tested

Samsung Galaxy J2 SM-J200h V5.1.1 Firmware /Flash File Without Password

Firmware 4 FILE 100% TESTED BY GSM SHEPON

How To Flash Samsung Galaxy J2 SM-J200H

Firmware

Step 1: Download Firmware file from the download section above

Step 2: Download Odin and extract the contents in the zip archive and save the files on your PC then switch off your device. Then run ODIN.

Step 3: Boot it in Download Mode by pressing and holding Volume Down + Home + Power Button simultaneously.

Step 4: You’ll see a warning screen, press Volume Up to continue.

Step 5: Connect the phone to computer via USB cable and wait for the device to be added by Odin, if no device is detected you need to reinstall the Samsung USB drivers. If your device is detected, you’ll see “Added” message in the message box.

Step 6: On ODIN windows, click on the PDA or AP button, then locate the firmware file that you downloaded and load it in ODIN and click Start Button.