Samsung Galaxy J2 Prime SM-G532G V6.0.1 Firmware /Flash File
Samsung Galaxy J2 Prime SM-G532G V6.0.1 Firmware /Flash File
100% TESTED NO DEAD RISK
TESTED BY GSM SHEPON
PHONE
Specifications
Network Scope | 2G, 3G, 4G |
Battery Type & Performance | Lithium-Ion 2600 mAh (removable) Stand-by time: - Talk-time: up to 12 hours (3G) |
Body & Weight | 144.8 x 72.1 x 8.9 millimeter, 160 grams |
Camera Factors (Back) | Autofocus, LED flash, auto face recognition, face beauty, f/2.2 aperture |
Camera Resolution (Back) | 8 Megapixel |
Camera Resolution (Front) | 5 Megapixel (LED flash, f/2.2 aperture) |
Chipset | Mediatek MT6737T |
Colors Available | Silver, Black, Gold, Pink |
Display Size & Resolution | 5.0 inches, 540 x 960 pixels (220 ppi) |
Display Type | PLS TFT Touchscreen |
Graphics Processing Unit (GPU) | Mali-T720 MP2 |
Memory Card Slot | MicroSD, up to 256 GB (uses SIM slot 2) |
Operating System | Android Marshmallow v6.0 |
Processor | Quad-core, 1.4 GHz |
RAM | 1.5 GB |
ROM | 8 GB |
Release Date | November 2016 |
Sensors | Accelerometer, proximity |
SIM Card Type | Dual SIM (Micro-SIM, dual stand-by) |
USB | MicroUSB v2.0, USB-on-the-go (OTG) |
Video | HD (720p) |
Wireless LAN | Yes, Wi-Fi direct, hotspot |
Other Features | - Bluetooth, GPS, A-GPS, MP3, MP4, Radio, RDS, GPRS, Edge, Multitouch, HTML |
HOW FLASH
Samsung Galaxy J2 Prime SM-G532G V6.0.1 Firmware
Step 1: Download Firmware file from the download section above
Step 2: Download Odin and extract the contents in the zip archive and save the files on your PC then switch off your device. Then run ODIN.
Step 3: Boot it in Download Mode by pressing and holding Volume Down + Home + Power Button simultaneously.
Step 4: You’ll see a warning screen, press Volume Up to continue.
Step 5: Connect the phone to computer via USB cable and wait for the device to be added by Odin, if no device is detected you need to reinstall the Samsung USB drivers. If your device is detected, you’ll see “Added” message in the message box.
Step 6: On ODIN windows, click on the PDA or AP button, then locate the firmware file that you downloaded and load it in ODIN and click Start Button.
Step 7: Once the installation is complete, you will see the PASS alert and your device will reboot automatically.
DOWNLOAD odin3_v3.12.7
DOWNLOAD Samsung-Usb-Driver-v1.5.60.0
DOWNLOAD FIRMWARE
Puck you you puting a password. after downloading so long
ReplyDeletelol blog stupid
ReplyDeletePASSWORD
ReplyDelete