Samsung Galaxy J2 Prime SM-G532G V6.0.1 Firmware /Flash File

Samsung Galaxy J2 Prime SM-G532G V6.0.1 Firmware /Flash File

100% TESTED NO DEAD RISK

TESTED BY GSM SHEPON

PHONE

Specifications

Network Scope	2G, 3G, 4G
Battery Type & Performance	Lithium-Ion 2600 mAh (removable) Stand-by time: - Talk-time: up to 12 hours (3G)
Body & Weight	144.8 x 72.1 x 8.9 millimeter, 160 grams
Camera Factors (Back)	Autofocus, LED flash, auto face recognition, face beauty, f/2.2 aperture
Camera Resolution (Back)	8 Megapixel
Camera Resolution (Front)	5 Megapixel (LED flash, f/2.2 aperture)
Chipset	Mediatek MT6737T
Colors Available	Silver, Black, Gold, Pink
Display Size & Resolution	5.0 inches, 540 x 960 pixels (220 ppi)
Display Type	PLS TFT Touchscreen
Graphics Processing Unit (GPU)	Mali-T720 MP2
Memory Card Slot	MicroSD, up to 256 GB (uses SIM slot 2)
Operating System	Android Marshmallow v6.0
Processor	Quad-core, 1.4 GHz
RAM	1.5 GB
ROM	8 GB
Release Date	November 2016
Sensors	Accelerometer, proximity
SIM Card Type	Dual SIM (Micro-SIM, dual stand-by)
USB	MicroUSB v2.0, USB-on-the-go (OTG)
Video	HD (720p)
Wireless LAN	Yes, Wi-Fi direct, hotspot
Other Features	- Bluetooth, GPS, A-GPS, MP3, MP4, Radio, RDS, GPRS, Edge, Multitouch, HTML

HOW FLASH

Samsung Galaxy J2 Prime SM-G532G V6.0.1 Firmware

Step 1: Download Firmware file from the download section above

Step 2: Download Odin and extract the contents in the zip archive and save the files on your PC then switch off your device. Then run ODIN.

Step 3: Boot it in Download Mode by pressing and holding Volume Down + Home + Power Button simultaneously.

Step 4: You’ll see a warning screen, press Volume Up to continue.

Step 5: Connect the phone to computer via USB cable and wait for the device to be added by Odin, if no device is detected you need to reinstall the Samsung USB drivers. If your device is detected, you’ll see “Added” message in the message box.

Step 6: On ODIN windows, click on the PDA or AP button, then locate the firmware file that you downloaded and load it in ODIN and click Start Button.

Step 7: Once the installation is complete, you will see the PASS alert and your device will reboot automatically.